精品视频在线观看专区,饥渴老熟妇乱子伦视频,五月天综合婷婷综合社,国产精品美女久久久久久小说

廣州霄騰機械有限公司

主營產品: 貼標機,灌裝機,封口機,旋蓋機,包裝機,進瓶理洗瓶機等

您現在的位置: 廣州霄騰機械有限公司>>后道二、三級包裝機系列>>捆扎機>> XT-K180全自動薄膜捆扎機

公司信息

聯人:
李生
址:
廣州市天河區東圃鎮車陂東路20號車陂十五社工業區四棟2樓A02
編:
510665
鋪:
http://www.hg0881.cn/st150880/
給他留言
XT-K180全自動薄膜捆扎機
全自動薄膜捆扎機
參考價 面議
具體成交價以合同協議為準
  • 型號 XT-K180
  • 品牌
  • 廠商性質 生產商
  • 所在地 廣州市

聯系方式:李生查看聯系方式

更新時間:2018-04-12 22:03:32瀏覽次數:1749

聯系我們時請說明是食品機械設備網上看到的信息,謝謝!

【簡單介紹】
XT-K180型全自動薄膜捆扎機--推盒汽缸退回后上熱封板開始工作,當汽缸向下作用時同時拉動捆包膜并壓緊捆包膜,下熱封開始工作,切斷并熱封住捆包膜。
【詳細說明】

XT-K180 型全自動薄膜捆扎機

XT-K180 Full-automatic Film Strapping Machine

工作原理:

  1盒子經輸送皮帶進入積盒架。

  2當盒子疊加達到設定的數值時,推盒汽缸開始工作,把多層盒子由積盒架推*板,同時拉動捆包膜,壓盒板向下壓緊盒子后推盒汽缸退回。

  3推盒汽缸退回后上熱封板開始工作,當汽缸向下作用時同時拉動捆包膜并壓緊捆包膜,下熱封開始工作,切斷并熱封住捆包膜。

  4熱封完成后,上下熱封汽缸及壓盒汽缸復位,一次捆包完成。

  5當推盒汽缸復位后頂盒汽缸立刻工作,當上下汽缸復位時疊盒動 作已經完成,開始下一次捆包!

XT-K180 型全自動薄膜捆扎機

Operating principle:

1 Boxes enter box- accumulating shell via conveying belt.

2 Box-pushing cylinder starts to push boxes onto upper plate from box-accumulating shell when boxes reach set number and draws box-strapping film at the same time. Box-pushing cylinder will go back after box-pressing plate compresses boxes.

3 Upper heat-sealing plate starts to run after box-pushing cylinder goes back. Box-strapping film is being drawn and compressed while box-pushing cylinder is going back, next, bottom heat-sealing begins to cut and heat-seal box-strapping film.

4 Upper and bottom heat-sealing cylinder reset after finishes heat sealing, that is to say, one box strapping is finished.

5 After the resetting of box-pushing cylinder, box-peaking cylinder starts to work at once. Box-stacking will be finished after upper and bottom cylinders reset, then the next time of box strapping will begin.

產品介紹

1、設備型號:XT-K180

2、產品概述:該機采用進口電氣元件,PLC控制系統、人機操作界面、具有運行穩定、操作簡單等特點;主要用于食品、藥品行業盒裝產品的組合捆扎。

Product introduction

1、Type:XT-K180

2、Overview: this machine runs stably and is easy to operate with the use of imported electrical elements, PlC control system and human-machine operation surface, used to strap combinedly products packaged with boxes in food and medicine industries.

技術參數Technology parameters:

XT-K180 

捆包尺寸Strapping size

zui大為280x200 x 130mm zui小50x30x 50mm

Maximum 280x200 x 130 mm minimum 50x 30x 50 mm

使用包材Strapping material

        PE膜   ( PE film)

適用扎帶規格(寬度)

Applicable strapping film standard (width)

35~80mm

捆扎膜厚度Film thickness

50~60um

捆扎速度Strapping speed

8-15捆/分鐘(8-15 rounds/ min)

工作電源Power supply

220V/50Hz

設備功率Output power

500W

工作氣壓Voltage

        0.6Mpa

外型尺寸Boundary size

1600x600x1500mm

設備總重量Net weight

300Kg

該公司的其它相關產品查看所有產品 >>


產品對比 二維碼

掃一掃訪問手機商鋪

對比框

在線留言