當前位置：岳陽市瑾耀精密設備有限公司>>藥廠生產包裝設備>>泡殼成形自動包裝機-JH-B1

泡殼成形自動包裝機-JH-B1

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品

聯系方式：查看聯系方式

更新時間：2022-10-02 11:58:04瀏覽次數：339次

聯系我時，請告知來自食品機械設備網

暫無信息

岳陽市瑾耀精密設備有限公司

經營模式：其他

商鋪產品：47條

所在地區：

詢價 給他留言

產品簡介

JH-B1泡殼成形自動包裝機應用了設計，使得此機價格低廉，耗材低廉，運轉成本低廉，但是成本效率卻是的

詳細介紹

JH-B1 泡殼成形自動包裝機應用了設計，使得此機價格低廉，耗材低廉，運轉成本低廉，但是成本效率卻是的。精準的碇劑 / 膠囊自下料系統及自動檢測系統使得本機全天候運轉祇需一人即可。 JH-B1 可適用于碇劑、糖衣 / 膜衣碇、硬膠囊、軟膠囊的 PTP包裝。
特性如下
1.	此機采連續式的旋轉運動非間斷式的往復運動，故無沖擊及噪音，運轉流暢。
2.	碇劑包裝可打橫貫的切線。
3.	采鐵弗龍蒸鍍的加熱板，接觸加熱 P.V.C 膜，使得加熱溫度較低，加熱材料均勻性較佳，運轉速度較穩定。
4.	全機采 SUS 304 不銹鋼外殼被覆，保證符合 G.M.P 要求標準。
5.	邊對邊的切斷方式，中間沒有材料浪費，至少省 6% 以上的包材成本。
6.	狀況監視器可顯示停機原因，如 P.V.C 鋁箔不足、加熱器故障等。
7.	換模調整準備時間不超過 1 小時，其中包含機換模、清潔、調整。

主機主要組件如下：	BLISTER PACKING MACHINE
機架：機械驅動機構與氣壓驅動結構。
包材進料系統與拉料輪
手工下料軌道板
鋁箔進料系統
切線站
振動下料系統 / 膠囊自動選料下料系統
控制面板與監視系統
P.V.C 預熱板
熱成形系統 ( 高壓空氣成形 )
熱封系統 打字 / 批號機構
成品計數器切斷模 P.I.D 溫度控制器

JH-B1 Blister forming and automated packing machine

The JH-B1 blister forming and automatic packing machine adopts the latest high-tech design that allows the cost of the servo to be affordable, with inexpensive supplies, low operating cost, yet with a maximum cost-return ratio. The automated precision tablet/capsule download system and automated screening system allow the servo to operate round-the-clock, while manned by only one operator. The JH-B1 servo is compatible for PTP packing of tablets, sugar-coated/membrane-coated tablets, hard capsules, and soft capsules.
Its feature is as follows
1.	The servo operates on a continuous rotation motion of a non-interrupted repetitive motion to be free of impact, noise, and runs smoothly.
2.	Option to incorporate row-wide perforation in tablet packing.
3.	Comes with Teflon plated heating board and contact heated PVC membrane to allow a lower heating temperature, optimal even heating, and stable rotation speed.
4.	The servo housing is built of SUS 304 stainless steel and is guaranteed to meet G.M.P. demａnd criteria.
5.	A diagonal trim-off method that does not create intermittent material waste to help conserve at least 6% in packaging cost.
6.	The status monitor prompts causes leading to servo pauses, i.e. low PVC foil, heater malfunction, etc.
7.	Mold adjustment and prepping guaranteed to be less than one hour, including servo mold change, cleaning and adjustment.

Product specification
Cycle timing	maximum rotation speed at 40 cycles per minute.
PVC capacity	maximum up to130mm in width and 350 micron in thickness
Area of each blister formed	Maximum up to 115*65mm.
Depth of draw	Standard hole depth at 12mm.

Dimensions
Dimensions	2150mm in length, 1800mm in height, 1150 in width
Weight	950kg
Power rating	220/240V, 3§, 50/60 Hz
Power consumption	4.2kw Air: 200L/min at 5 kg/cm

The servo’s main components comprised of	BLISTER PACKING MACHINE
Equipment mount: for the mechanical transmission mechanism and pneumatic pressure transmission mechanism
Packing material feeding system and material dispensing wheel
Manual material unloading panel
Aluminum foil feeding system
Line cutting station
Vibrating material unloading system/automated capsule sorting and unlading system
Control panel and monitoring system
PVC preheating panel
Heat forming system (pressurized air forming)
Heat sealing system, typeset/lot number imprint mechanism
Complete product counter, trim-off mold, PID temperature controller