當前位置：北京三尼陽光科技發展有限公司>>信號平均器>>雙通道ADC顯示控制模組

雙通道ADC顯示控制模組

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價 收藏產品

聯系方式：查看聯系方式

更新時間：2021-08-25 09:09:52瀏覽次數：258次

聯系我時，請告知來自食品機械設備網

產品分類 品牌分類

暫無信息

北京三尼陽光科技發展有限公司

經營模式：其他

商鋪產品：74條

所在地區：

詢價 給他留言

產品簡介

GeneralThemodel4161Aisadualchannel

詳細介紹

General
The model 4161A is a dual channel, analog to digital converter (ADC) module which will measure one or two analog voltages, display the result on a digital panel meter, and allow it to be read by an external computer connected to the module's RS232 or GPIB interface.

The module has two signal input channels, A and B, each with a full-scale sensitivity of ±10 V DC. On receipt of a trigger commａnd at the appropriate channel the input voltage is digitized to a 5 mV resolution. A computer coupled to the module can determine the value of the input voltage by sending a simple ASCII command. The 3½ digit panel meter on the 4161A can be switched to monitor either of the signal channels.

Input
	Channels	Two
	ADC Inputs	BNC front-panel connectors, A and B
	Input Impedance	1 MΩ
	Input Full-Scale	±10 V
	Accuracy	±5 mV
	Linearity	±5 mV
	ADC Trigger Inputs	BNC front-panel connectors, corresponding to channel A and channel B ADC inputs. Connectors are duplicated on rear-panel
	Trigger Thresholds	TTL. Triggers on rising edge of applied positive logic TTL pulse
Digital Display
	Type	3½ digit LED display showing (Measured voltage / 20)
	Display Selection	Switch selects channel A or channel B
Computer Interfaces
	RS232	DIP switch selectable baud rate, terminator, character echo, parity and data bits
	GPIB	DIP switch selectable address and terminator
	Status Indicators	Front panel LEDs indicate GPIB Talk, Listen, SRQ and Remote
	Commａnd Set	Twelve mnemonic type commands allowing both asynchronous and synchronous readings. Digitized voltages are reported back to the computer in integer format, with ±2048 corresponding to an input voltage of ±10.24 V
Output
	Busy Out	Rear-panel BNC connector generating TTL signal which under computer control will:- 1) Remain at logic 0 until a synchronized read commａnd is issued by the computer. 2) Go to logic 1, releasing external trigger hold-off circuitry (such as can be provided by the SIGNAL RECOVERY model 9650A). 3) Return to logic 0 on receipt of a trigger signal at either the A or B ADC trigger inputs, and remain there while the measured value(s) are transferred back to the computer and thereafter until the next synchronized read command
Analog Panel Meter
	Type	Edge-indicating meter monitoring the voltage at the associated front-panel analog input BNC connector. This meter is completely independent of the analog to digital converter functions
	Input Impedance	10 kΩ
	Full-scale sensitivity	±10 V
Power Requirements		+24 V at 50 mA; -24 V at 50 mA +12 V at 600 mA; -12 V at 30 mA +6 V at 550 mA; -6 V at 10 mA
Dimensions
	Height	8¾" (222 mm)
	Width	2¾" (70 mm)
	Depth	9¾" (248 mm)
Weight		2.5 lb (1.14 kg)