TD系列垂直提升機產品概述

       TD系列垂直提升機適用于垂直輸送堆積密度不大于1.5t/m3的粉狀、粒狀、及小塊狀的磨琢性較小的散狀物料，如糧食、煤、水泥、碎礦石等，提升高度40m。TD系列斗式提升機嚴格按照J(rèn)B3926-85《垂直斗式提升機》標準設計制造，目前國內常用的斗式提升機均為垂直式。TD系列垂直提升機特點為：結構簡單，運行平穩，挖取式裝料，離心重力式卸料，物料溫度不超過60℃；TD系列斗式提升機與傳統D型斗式提升機相比輸送效率高、料斗形式多，應優先選用。本機備有四種料斗：Q型（淺斗）、H型（弧底斗）、zh型（中深斗）、sh型（深斗），分別輸送各種物料，用戶可以根據物料特性來選擇適當?shù)牧隙?。本提升機代號為TD,即帶式斗式提升機；產品規格以斗寬表示。

Product overview
   TD series bucket elevator is suitable for the vertical transport of bulk density is not greater than 1.5 t/m3 powder, granulated and small lump of grinding cut less material, such as grain, coal, cement, crushed ore, hoisting height to 40 m.TD series bucket elevator in strict accordance with the JB3926-85 standard design and manufacture of vertical bucket elevator, the current domestic common bucket elevator are vertical.TD series bucket elevator features: simple structure, smooth operation, harvest type charging, centrifugal gravity discharge, the material temperature less than 60 ℃;TD series bucket elevator compared with the traditional D type bucket elevator, hopper, high transmission efficiency should be preferable.This machine is equipped with four hopper: Q type (light pipe), H (arc bottom bucket), zh (in a deep bucket), sh (deep), conveying a variety of materials, respectively, a user can choose according to material features of appropriate hopper.This elevator codes for TD, the belt bucket elevator;Product specifications to dou wide said.
 

TD系列垂直提升機主要特點

1.提升范圍廣,這類提升機對物料的種類、特性要求少,不但能提升一般粉狀、小顆粒狀物料,而且可提升磨琢性較大的物料.密封性好,環境污染少。
2. 驅動功率小,采用流入式喂料、誘導式卸料、大容量的料斗密集型布置.在物料提升時幾乎無回料和挖料現象,因此無效功率少。
3.使用壽命長,提升機的喂料采取流入式,無需用斗挖料,材料之間很少發生擠壓和碰撞現象。本機在設計時保證物料在喂料、卸料時少有撒落,減少了機械磨損。
4. 運行可靠性好,*的設計原理和加工方法,保證了整機運行的可靠性,*時間超過2萬小時。提升高度高.提升機運行平穩,因此可達到較高的提升高度。

Features
1. Ascension is wide, this kind of elevator less kinds, characteristics of the material requirements, not only can improve the general powder, small granular materials, and can improve grinding cut larger material. Good sealing, less environmental pollution.
2. Driving power is small, use of feeding, induction of inflow discharge, large capacity of hopper intensive layout. In material ascends almost no back and dig material phenomenon, therefore less reactive power.
3. The service life is long, hoist feed take into the type, without using bucket digging of material, the material between the extrusion and collision occur rarely.The machine when the design to ensure material few scattered when feeding, discharging, reduce the mechanical wear and tear.
4. Good reliability, advanced design principle and processing method, ensure the reliability of the machine running, trouble-free time more than 20000 hours.High hoisting height. Hoist running smoothly, thus can achieve high hoisting height.
TD型垂直提升機安裝尺寸

Installation dimensions

TD系列垂直提升機技術參數表

Parameters

說明：1.表中斗容為計算斗容，輸送量按填充系數0.6計算得出。
　　 2.斗提機料斗用途為:淺料斗：輸送潮濕、易結塊、難拋出的物料。如濕沙、濕煤等。
　　　 深料斗：輸送干燥的、松散的、易拋出的物料。如水泥、煤塊、碎石、石英砂等。