詳細介紹
美國泰樂TYLER進口不銹鋼離心泵
I:美國泰樂TYLER進口不銹鋼離心泵:臥式單級單吸離心泵采用zui先jin的水力模型,根據IS型單級單吸離心泵之性能參數和立式泵的*結構組合設計,該產品軸封選用硬質合金機械密封裝置,具有高效節能、性能可靠、安裝使用方便等特點。
II: 美國泰樂TYLER進口不銹鋼離心泵主要特點:
1、運行平穩:泵軸的同心度及葉輪優異的動靜平衡,保證平穩運行,*振動。
2、滴水不漏:不同材質的硬質合金密封,保證了不同介質輸送均無泄漏。
3、噪音低:兩個低噪音的軸承支撐下的水泵,運轉平穩,除電機微弱聲響,基本無噪音。
4、故障率低:結構簡單合理,關鍵部分采用*品質配套,整機*工作時間大大提高。
5、維修方便:更換密封、軸承、簡易方便。
6、占地更?。撼隹诳上蜃蟆⑾蛴?、向上三個方向,便管道布置安裝,節省空間。
III: 美國泰樂TYLER進口不銹鋼離心泵應用范圍:
小型*空調循環 冷卻系統 工業清洗
水處理(水的凈化) 水產養殖 施肥/計量系統 環境應用
進口不銹鋼離心泵技術參數:
流量Q 0.3~400m3/h
配帶功率 0.55~90KW
揚程H 5~125m
進口直徑 32~200mm
介質溫度為-20°C~150°C
轉速n 2900、1450r/min
高工作壓力 1.6MPa
轉速:2900r/mim-1450r/mm
IIII:美國泰樂TYLER進口不銹鋼離心泵工作條件
稀薄、干凈、不凝、不爆炸、不含固體顆粒或纖維的液體。
液體溫度: 常溫型-15℃至+70℃ 熱水型+70℃至+110℃
zui大環境溫度:+40℃
zui大運作壓力:10bar zui大進口壓力受zui大運作壓力限制
介質酸堿性:PH4~9
美國泰樂TYLER進口不銹鋼離心泵:
用戶*,信譽*,優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證,我公司服務質量管理體系的宗旨是:建立并不斷完善科學、合理、高效的服務質量管理體系,公正、準確、及時地完成客戶的售后服務質量保障工作,為我公司的客戶服務建立良好、全面、充分的服務體系。
The United States imports of stainless steel centrifugal pump TYLER Taylor
The United States I: TYLER imported stainless steel centrifugal pump Taylor: Horizontal single-stage single suction centrifugal pump adopts the most advanced hydraulic model, according to the IS type single-stage single suction centrifugal pump performance parameters and vertical pump with unique structure design, the product seal made of hard alloy mechanical seal device has the characteristics of high efficiency, reliable performance, installation and use convenient etc..
The United States imported TYLER II: Taile stainless steel centrifugal pump main features:
1, stable operation: absolute concentricity of pump shaft and impeller with excellent static and dynamic balance, to ensure smooth operation, no vibration.
2, leakproof: hard alloy seal with different materials to ensure the transportation of different media without leakage.
3, low noise: two low noise bearings under the support of the pump, smooth operation, in addition to the motor weak sound, no noise.
4, the failure rate is low: the structure is simple and reasonable, the key part of the international first-class quality matching, the whole machine failure time greatly improved.
5, easy maintenance: replace seal, bearing, simple and convenient.
6, covers an area of more provinces: exports can be left, right, up three directions, the layout of the pipeline installation, saving space.
The United States imported TYLER III: Taile stainless steel centrifugal pump application:
Industrial cleaning of circulating cooling system for small central air conditioner
Environmental applications of water treatment (water purification) aquaculture fertilization / metering systems
Technical parameters of imported stainless steel centrifugal pump:
The flow of Q 0.3 ~ 400m3/h
With a power of 0.55 ~ 90KW
Lift H 5 ~ 125m
Inlet diameter of 32 ~ 200mm
Medium temperature of -20 degrees C ~ 150 C
N 2900, 1450r/min speed
High working pressure 1.6MPa
Speed: 2900r/mim-1450r/mm
IIII TYLER: the United States imports of tylosin stainless steel centrifugal pump working conditions
Thin, clean, non condensable, non explosive, non solid or liquid.
The temperature of the liquid at room temperature: 15 DEG to +70 DEG C hot water type +70 DEG to +110 DEG C
Maximum ambient temperature: +40
Maximum operating pressure: 10bar maximum inlet pressure subject to maximum operating pressure limit
Medium acidity and alkalinity: PH4~9
The United States imports of stainless steel centrifugal pump TYLER taylor:
Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.
進口不銹鋼離心泵guan網:http://www.twvalve。。net/html/2276.html