●2KN LP型配有抗扭曲保護的定位銷。
●可拆卸的接口夾持裝置便于在前面安裝工裝
●通過使用夾持裝置，使工裝受很大的力卻不會損
傷固定接口處
●壓力機頭由H7加工平面導向
●堅固的夾具可確保機頭位置精確
●通過操縱曲柄調整精細螺栓，壓板間隙可以簡單而
迅速得到調整
●工作臺便面看大的T型槽可方便壓緊工件
●喉深和機體高度可根據需要再加長
●可通過安裝使用用戶訂制的不同配件，大幅度擴展應用范圍
●Very low air consumption owing to the special multi-chamber cylinder
●The continuously adjustable standard stroke is 40mm. The stroke of the 4, 8 and 12kN LP presses can be extended to max. 60mm, that of the 13 and 20kN LP presses to max. 80mm on request
●The precise and non-floating adjustable V-guide safeguards accurate working, even with tools without a guidance
●The detachable gripping piece allows fixing of the spigot from the front
●By means of the spigot clamp a high holding force is achieved without damage to the fixing spigot
●The head of the press is guided by an H7 manufactured flat guidance.
●A solid gripping safeguards the exact position of the head
The daylight can be quickly and easily adjusted by means of a fine pitch thread operated by a crank handle
●Table with wide T-grooved clamping surface
●The height daylight as well as the wide throat can be extended even further on request.
●The electro-pneumatic safety controls comply with the present CE regulations
●Combination of the BALTEC rotary indexing table with each of the SEM/Control 2000 presses allows up-to-date and rational working with large scale series
●The range of application can be substantially expanded by means of customer-specific accessory equipment
|
