●由于有特別多腔氣缸，所以氣體消耗量很低。
●精密導向V型槽，可調整到無間隙，
精密程度甚至可取代工裝的導向裝置。
●可拆卸的接口夾持裝置便于在前面安
裝工裝，通過使用該裝置，使工裝受很
大的力卻不會損傷固定借口處
●壓力機頭由H7加工平面導向
●堅固的夾具可確保機頭位置精確
●360°可調手柄可增加雙手操作開關（可選）
●通過操縱曲柄調整精細螺距，嚴辦間隙可以
簡單而迅速得到調整
●工作臺表面寬大的T型槽可方便壓緊工件
●喉深和機體高度可根據需要再加長
●可通過安裝使用用戶訂制的不同配件，大幅度擴展應用范圍
●Very low air consumption owing to the special multi-chamber cylinder
●The precise and non-floating adjustable V-guide safeguards accurate working, even with tools without a guidance
●The detachable spigot clamp allows frontal loading. By means of the spigot clamp a high holding force is achieved without damage to the fixing spigot
●The head of the press is guided by an H7 manufactured flat guidance
●A solid clamping safeguards the exact position of the press head
●The 360 degree re-adjustable trigger lever can, be supplemented by a two-hand operation switch. （optional）
●The daylight can be quickly and easily adjusted by means of a fine pitch thread operated by a crank handle
●Table with wide T-grooved clamping surface
●Extended gap and height frames can be extended further, if required
●The range of application can be substantially expanded by means of customer-specific accessory equipment
●No Guarding needed
| Dimensions | HKP/L 4 kN/8kN/12kN | HKP/L 13kN/20kN | HKP/L 33kN/45kN/56kN |
| A | 310 | 420 | 520 |
| B | 100 | 130 | 185 |
| C | 415 | 590 | 715 |
| D | 200 | 300 | 340 |
| D1 | 20 | 30 | 30 |
| E | 120 | 160 | 200 |
| F | 93 | 130 | 150 |
| G | 75 | 100 | 120 |
| H | / | 100 | 100 |
| I | 10 | 10 | 12 |
| J | 40 | 80 | 80 |
