大口徑出渣門

可全自動開閉罐蓋； 可以實現高溫高壓提取，給提取工藝提供了更多的選擇，此出渣門適合大口徑倒錐型提取罐的出渣方式，安全系數高。

Large-diameter residue discharging door

The tank cover can be automatically opened and closed. High temperature and high pressure extraction can be realized to provide more selection for extracting technology. With high safety factor, the residue discharging door is suitable for residue discharging of large-diameter upside-down taper type extracting tank.

提取罐出液系統可選裝置

1、提取罐底部的過濾板采用兩層，一層為厚度5-6mm的不銹鋼支撐板，上有直徑為10mm 的圓孔，在支撐層的上面，是一層厚度為0.6mm薄不銹鋼板， 上面密布0.5×10mm的長孔，相對來講，長孔更不易堵塞。

2、可以根據客戶的物料需求，在提取罐內膽上裝過濾筒，可選用立紋式過濾網。過濾筒的過濾面積比底部面積增加了好幾倍，解決了提取罐底部易堵出液難的問題。

1. The filter board at the bottom of the extracting tank is made of two layers. The first layer is a 5-6mm thick stainless steel supporting board with a 10mm-diameter round hole at its top. Another thin stainless steel sheet with a thickness of 0.6mm thick is at the top of this supporting layer, and long holes of 0.5×10mm are spread over the stainless steel sheet. The long holes are comparably not easy to be blocked.

2. According to material requirements of customers, the filter barrel is installed on the internal bladder of the extracting tank. Vertical grain type filter screen can be adopted. The filtering area of the filter barrel is several times higher than the bottom area, which can solve the problem of blocking and difficult liquid discharging at the bottom of the extracting tank.