KOMET Vacuum shrink combination
SD 520 B + ST 170
Standard equipment: stainless steel construction. Each chamber has one stainless steel sealing bar in front
660 mm. Sealing with airpressure support. High efficiency vacuum pump, 151 cbm/h. Cut-off sealing separate-ly adjustable. User friendly waterprove control board. Vacuum controlled by sensor. Automatic lid movement. Conveyors with height adjustment. Soft ventilation. Vacuum stop button.
Following options are possible: gas flushing, lid height 300 mm, vacuum pumps 205 cbm/h or 305 cbm/h.
Technical detail S 520 B: | ||
Chamber size (w * l * h/mm): | 800 x 730 x 250 (300) | |
Control board: | Perfect | |
Usable chamber hight (mm): | 180 (230) | |
Sealing length (mm): | 2 x 660 | |
Sealing seam | sealing / cutting | |
Distance x (mm): | 730 | |
Position of sealing bar | ||
- Standard: | front | |
- Option: | – | |
Vacuum pump (cbm/h): | 151 (205 / 305) | |
Power connection (v/ph/Hz): | 400/3+N+PE/50Hz | |
Power (kW): | 6.7 (9.15 / 11.4) | |
Compressed air (l/min): | 50 at 6 bar | |
Maximum bag (mm): | 650 x 800 | |
Outer dimensions (w * l * h/mm): | 1625 x 1270 x 1550 | |
Weight (kg): | 620 (720 / 730) |
Air pressure connection necessary!
Option
- Gas flushing for soft products
- Bi-active sealing
- Chamber hight 300 mm
Technical detail ST 170: | ||
Working area (w * l/mm): | 820 x 450 | |
Dipping depth (mm): | 100/150/200 | |
Water volume (l): | 140 | |
Maximum Product weight (kg): | 50 | |
Power connection (v/ph/Hz): | 400/3+N+PE/50Hz | |
Power (kW): | 37 (with steam 1) | |
Fuse protection (Amp.): | 63 | |
Compressed air (l/min): | 25 at 6 bar | |
Outer dimensions (w * l * h/mm): | 950 x 890 x 1500 | |
Heater power (kW): | 36 | |
Weight (kg): | 265 |
Air pressure connection necessary!
Use a water softener to reduce water hardness!
ST 170: stainless steel construction. The automatic transport of the product in and out of the shrink tunnel
is controlled by a photocell.
- Water temperature is adjusted with a thermostat.
- Automatic water level regulation
- Steam exhaust release through the lid.
- Dipping time and dipping depth of water, also time for water to drip from product is adjustable.
- Slight on left side
- Pneumatic dipping cylinder
- Automatic filling of water
- User friendly construction, easy cleaning.
- Use of machine without dipping process is possible.
- Manual dipping is possible.
- Heating power 36 kW
- Dipping platform 820 x 450 mm
© KOMET Maschinenfabrik GmbH