3027B加速度傳感器

概述

The Dytran 3027B is a double ended IEPE reference (comparison) accelerometer, offering a convenient means of determining the sensitivity and frequency response characteristics of unknown acceleration, velocity and displacement sensors. A vibration laboratory already equipped with an electrodynamic shaker and control system can easily incorporate use of the model 3027B to accomplish in-house NIST traceable calibrations. Model 3027B offers a >10 mV/g sensitivity, and mounts to a shaker head via a 10-32 tapped hole.

Back-to-back comparisons with a double ended calibration standard accelerometer, such as the Dytran model 3027B, entails mounting the test accelerometer directly to the top mounting surface of the calibration standard (model 3027B) and driving the coupled pair with an electrodynamic shaker system at various frequencies and amplitudes. At each test frequency, the amplitude is set and the corresponding output read from the test accelerometer. To form a complete measurement system, the user will need to supply the cables, power supply unit and electrodynamic shaker system. The model 3027B should be used for low frequency, low g level measurements.

特性

1. >10 mV/g sensitivity

2. 500g range

3. .5 to 10,000 Hz frequency range (±5%)

4. 10-32 coaxial connector

5. 1/4 tapped holes, top and bottom

6. 100 grams

7. Stainless steel

8. Back to back standard accelerometer

9. IEPE

應(yīng)用

1. Back-to-back accelerometer calibration

2. Low frequency, low g level measurements

3. NIST traceable calibrations (when used with appropriate electrodynamic shaker, power supply and control system)

參數(shù)

SENSITIVITY [1] >10 mV/G

DISCHARGE TIME CONSTANT 1.0 Sec

FREQUENCY RESPONSE ±5% [2] 0.5 TO 10k Hz

RESONANT FREQUENCY, NOM 40 kHz

RANGE FOR ±5 VOLTS OUT, NOM. ±500 G

OPERATING FORCE RANGE [3] ±40 Force-Lbs.

EQUIVALENT ELECTRICAL NOISE FLOOR .01 G, RMS

OUTPUT IMPEDANCE <100 Ohms

COEFFICIENT OF THERMAL SENSITIVITY .03 %/°F

TEMPERATURE RANGE -60 to +200 °F

TRANSVERSE SENSITIVITY, MAX 3 %

CONNECTOR, RADIAL 10-32 COAXIAL Jack

MOUNTING HOLES, TOP/BOTTOM 1/4-28/10-32 UNF-2B

MATERIAL (NON-MAGNETIC) 300 SERIES STAINLESS STEEL

SUPPLY CURRENT (CONSTANT CURRENT) 2 to 5 mA

COMPLIANCE VOLTAGE +20 VDC

WEIGHT 3.5/100 oz/grams

配件

Supplied Accessories: (1) model 6200 mounting stud (10-32 to 10-32), (1) model 6201 mounting stud (10-32 to 1/4-28)

Recommended Accessories: model 4010C current source power unit, model 6213 adhesive mounting base

Compatible Cables: 6010A, 6011A, 6012A, 6016A, 6018A, 6022A, 6026A, 6032A, 6033A, 6049A, 6050A, 6051A, 6053A, 6054A, 6066A, 6069A, 6093A, 6099A, 6400A, 6401A, 6412A, 6429A, 6924A, 6930A, 6991A

(2) Model 6200 10-32 to 10-32 mounting studs

(1) Model 6201 10-32 to 1/4-28 mointing stud

(1) Model 6167 1/4-28 to 1/4-28 mounting stud

訂貨型號(hào)

3027B

3027B1T   TEDS