When a strong low frequency signal is transmitted through the ground from one probe to another, the wave used is a "carrier." The FL-MLL has a special low frequency wave that travels great distances in the ground. The wave will take the path of least resistance through the ground. Precious metals are easy for the wave to travel through. If metal or a highly conductive target is in the wave''s trajectory, it encounters less resistance along its path. A stronger carrier wave will return to the receiving probe. When this happens the Target Response Lamp on the FL-MLL lights. A metered response will also be indicated on the control panel of the MLL. Using this technology, many discoveries have been made in Greece, Mexico, the Philippinesright here in the USA.
Covers 24,000 square feet,approximay 1/2 acre(覆蓋面積24000平方英尺(相當于610平方米),大約3畝地左右).

Determines size, shapedepth to 130 feet
(根據物體的大小形狀或者深度的不同,深度約在130英尺.)

User friendly, one switch for 6-way testing

Extra large meter for easy reading(物體越大越容易測量)

4 - copper plated rods(4根銅天線)

4 - 110 ft wire spools(4根110英尺的卷軸線圈)

Battery, charger & connectors(電池,充電器及連接附件)

Dummy loads

Now you can see what is buried before digging!(具體都能探測到什么哪?)

Locate Treasures, Gold Veins, Caves(定位地下的礦藏,如金礦,地下空洞等)

Find what the old timers missed. In many cases they missed large deposits of gold or silver just a few feet from where they worked. Many treasures have been walked away from in the same manner. Now come back to these locationscash in. The Mother Load Locator is a proven instrument based upon today''s technology. Looking for a Deep Cache? Are you trying to locate deeply buried coins or bullion? Looking for Spanish gold bars or buried treasure? Or perhaps you are a prospector trying to locate a placer pay streak, abandoned tunnel or cave?

The FL-MLL is used by treasure hunters to "electronically" locate gold, silver, copper,brass hoards. Prospectors have been using the unit for identifying the changes in soil conductivity, all with great success!(FL-MLLL經常被作為尋寶器用來探測地下的金,銀,銅或者青銅器等金屬物體.儀器的操作者經常根據儀器電導率的不同來判斷底下所掩埋的不同金屬物體.)

Measuring resistivity, engineers under our direction have perfected a method of using special electronic charging waves that charge the groundmeasure the returning resistivity of the wave. It is similar to a standard metal detector, except with a metal detector you are limited to the size of the search coil, with very little deptharea coverage.

With the FL-MLL a signal is sent out to look for targets as deep as 130 feet. Imagine the amount of time you savethe ground you can cover!

FL-MLL

The concept behind which the MLL was developed is the use of FERF''s, or Free Electron Radiation Fields. All buried precious metals suffer a slight deterioration due to acid rain, snowother chemicals. When acidultra high radiation contacts metals, a free electron radiation field is created. The longer an object is buried the stronger the field. When the MLL sends a Carrier Wave into the ground it sinksdisperses. It finds the radiation field surrounding the precious metalwill automatically tune to it. The MLL measures the return between various points with the ground probes. As a in resistivity is noted or certain readings in the gold or silver ranges are noted, the FL-MLL will find the target. After a target has been pinpointed, its depth can be determined with the FL-MLL. This is done by moving the ground probes closer to each other, the meter readings will continue to get lower. Depth is approximay half of the distance where the lowest reading occurred. Through positioning of probesmeter readings, the MLL will also determine the sizeshape of targets.

How the FL-MLL Works

The FL-MLL requires no special permits to operate. It does not use explosives or chemicals like other systems. The MLL finds nonferrous metalswill locate tunnels or abandoned mines. The unit is portable, approximay 35 pounds,is sealed in a heavy duty water tight carrying case. It can be set up quickly, probes driven in the groundconnecting wires run in a matter of minutes. The MLL is powered by a 12-volt rechargeable sealed batterygenerates a 5 amp. 20 volt signal. Both the batterya recharging system are included with the Mother Load Locator. A Carrier Wave signal is sent between the ground rods with the strength measured six different directions. This will identify conductive groundpossible targets to be recovered! If the meter has a low resistance reading, there is probably a large cache of metal present. The MLL will also locate targets in wood, irontin containers buried far beneath the ground.